Data for: Improved 3D-QSAR prediction by multiple-conformational Alignment： A case study on PTP1B inhibitors
Contributors: Jian Wang, Jianping Mao, Wei Li, Xiangyu Zhang, Kazuo Koike
... Three different molecular alignment methods were used for the development of 3D-QSAR models.(1) docking-based alignment (DBA); (2) pharmacophore-based alignment (PBA) and (3) co-crystallized conformer-based alignment (CCBA).
Data for: Robust attitude control for a rigid-flexible-rigid microsatellite with multiple uncertainties and input saturations
Contributors: Hai Huang, Kaixing Zhou, Liang Sun, Liming Fan
... The “Supplementary Data” folder contains the main content and results of this study. It can be divided into three parts as follows. 1) “Simulation Model and Initial Conditions” folder: It contains the attitude tracking model “A1_RCISFS.slx” of the microsatellite SSS-1P in Matlab/Simulink environment, the initial conditions “A1_RCISFS_Init.m” in Case 1 and the initial conditions “B1_Sin_Case.m” in Case 2. 2) “Data and Figure of Case1” folder: It contains the main simulation data and results in Case 1. There are seven files in matrix format which can be opened by software matlab. They are the original data from simulations which are essential for drawing. The “Figure.m” file is the drawing program in software matlab. 3) “Data and Figure of Case2” folder: It contains the main simulation data and results in Case 2. There are eight files in matrix format which can be opened by software matlab. They are the original data from simulations which are essential for drawing. The “Figure.m” file is the drawing program in software matlab.
Data for: Flow analysis of a switching valve with innovative poppet head geometry by means of CFD method
Contributors: Grzegorz Filo, EDward Lisowski, Janusz Rajda
... Laboratory experiment results with two versions of poppet head geometry and two cases of the load: low and high.
Data for: Effect of Al, Ti and C additions on Widmanstätten microstructure and mechanical properties of cast Al0.6CoCrFeNi compositionally complex alloys.
Contributors: Alex Asabre
... The XRD data present in this paper are 2θ versus intensity data obtained from our diffractometer for all investigated alloys. The XRD data are provided in attached Excel files and a summary of the plotted diffraction patterns is shown in Fig. A1 of supplementary material. The calculated lattice parameters together with their standard deviation for each detected phase are listed in Table 1 for all studied alloys. BSE micrographs taken at different magnifications are presented to document the effect of microalloying on microstructure. For all CCAs, five BSE micrographs are provided, one low magnification image with a remnant indent spanning all phases present in the alloy and four other high magnification micrographs. From some of these BSE images, the microstructural parameters, i.e. mean prior grain size d and average thickness of FCC plates λ listed in Table 2, were determined. The overall chemical composition averaged over all phases present in the studied CCAs were determined in an external laboratory and are listed for some alloys in Table 3. In addition, the local chemical composition of the phases measured at three different locations in a transmission electron microscope (TEM) for the Ti3C0.25 CCA are given in Table 4. The mean volume fraction of the FCC phase provided in Table 2 were determined from a mass balance, see section B of supplementary material. The raw tensile results data obtained at different temperatures are provided in the attached Excel files.
Data for: Investigation of Surface Micro-Crack Growth Behavior of Asphalt Mortar based on the Designed Innovative Mesoscopic Test
Contributors: Xunhao ding
... Data for the testing and micro-crack analysis
Data for: Facile UV-curable fabrication of robust, anti-icing superhydrophobic coatings based on polyurethane
Contributors: Zuozhen Liu
... In this study, a novel robust, anti-icing, self-cleaning superhydrophobic coating was prepared via a simple, environmentally, friendly and efficient strategy which bond nanoparticles SiO2 to the polyurethane surface under UV-curing. The superhydrophobic coating with WCA of 165o and SA of 2o, good antifouling properties, self-cleaning properties, excellent mechanical stability (750 sandpaper tests) and anti-icing properties. The simple spray method and the green UV-curing technology make the superhydrophobic coatings have broad application space.
Data for: X-ray tomography and numerical study on low-velocity impact damages of three-dimensional angle-interlock woven composites
Contributors: Bohong Gu, Junjie Zhang, Wenjing Cao, Baozhong Sun
... Impact test data and finite element analyses modeling information have been uploaded in the zip file.
Contributors: Babak Khavari, Andreas Sahlberg, Alexandros Korkovelos, Mark Howells
... Population clusters for Africa. The population clusters include the following data: 1. id – The IDs are given as a unique number for each cluster. This enables the user to process the data contained in the clusters outside of a GIS software and then merge the data with the clusters. 2. Country - Name of the country. 3. Population – This is the population in each cluster obtained from the population dataset. 4. NightLight – This value is obtained from the night-time light map and represents the maximum luminance detected in each cluster based on the latest stable light product available. 5. ElecPop – The number of people in each cluster who live in areas in which the stable light product detect light sources. 6. Area – The area of each cluster given in sq. kilometres. 7. Pop2030 – The population in 2030. The datasets are generated using an open source plugin available for QGIS 3.2 and QGIS 3.4 through the KTH-dESA GitHub repository (https://github.com/KTH-dESA/PopCluster).
Contributors: Matteo Spagnolo, Adriano Ribolini
... The two tables are the ones included in the main text. Table 1 refers to the glacial moraine boulder samples, which have been collected and dated with cosmogenic isotope exposure dating techniques. Table 2 refers to the 66 reconstructed glaciers: location, size and volume, equilibrium line altitude and the type of landform present at the glacier front. The zipped folder contains a shapefile that can be opened with a GIS software to visualise and locate all reconstructed glaciers.
Data for: High through-plane thermal conductivity and electrical insulation of flexible composite films with aligned boron nitride for thermal interface material
Contributors: Wei Zhu
... this data is about polymer-matrix composites,thermal properties,directional orientation, electrical properties and thermal interface application.