2026-10-16T00:52:03Z https://data.mendeley.com/oai

oai:data.mendeley.com/jd8y573s4r.3 2021-09-30T06:45:47Z

Okawa, Toshinori Data on bond strength of resin cement systems to CAD/CAM resin composite after aging Mendeley Data The manufacturer’s recommended primer was applied to the CAD/CAM resin composite. They were bonded using three different types resin cements. Half of all the specimens were tested immediately following 24 hours of immersion in water at 37°C (thermaocycling 0 cycle ; TC 0), and half were subjected to thermocycling 10,000 cycles following 24 hours of immersion in water at 37°C (TC 10,000). The tensile test was used to determine the bond strength in MPa. The fracture surface and mode between resin cement and CAD/CAM resin composite were determined by naked eye and scanning electron microscope observation. Health Sciences Yagi, Masaki Kawano, Fumiaki Dataset doi:10.17632/jd8y573s4r.3 oai:data.mendeley.com/jd8y573s4r.3 Creative Commons Attribution 4.0 International http://creativecommons.org/licenses/by/4.0 https://data.mendeley.com/datasets/jd8y573s4r 2021-09-30T06:45:47Z