2026-10-15T20:12:26Z https://data.mendeley.com/oai

oai:data.mendeley.com/m27cdy3z4c.2 2021-02-25T23:59:45Z

Casson, Alex 3D printer molds for head phantom shapes Mendeley Data Mold shapes for casting gelatine into a head shape for creating head phantoms as used in: - S. Kohli and A. J. Casson, “Removal of gross artifacts of transcranial alternating current stimulation in simultaneous EEG monitoring,” Sensors, vol. 19, no. 190, pp. 1–23, 2019. - S. Kohli and A. J. Casson, “Towards close-loop tES: Workload monitoring during tACS stimulation,” Brain Stimulation, vol. 10, no. 4, pp. e28–e29, 2017. - S. Kohli, S. Krachunov and A. J. Casson, “Towards closed-loop transcranial Electrical Stimulation: a comparison of methods for real time tES-EEG artefact removal using a phantom head model,” Brain Stimulation, vol. 10, no. 2, pp. 467–468, 2017. - S. Kohli and A. J. Casson, “Towards signal processing assisted hardware for continuous in-band electrode impedance monitoring,” IEEE International Symposium on Circuits and Systems, Baltimore, May 2017. Head shape is based upon a human dummy used for automotive testing, with source https://grabcad.com/library/mannequin-1. This has been hollowed out so that it can be filled with gelatine to get the wanted shape. The mold is broken down into 7 pieces, each small enough to be produced on a desktop sized 3D printer. These should be printed, and then a Silicone seal used to to have a water tight connection between the different parts, before filling with gelatine. We usually print in PLA, but a flexible filament could be used to help with easy removal. If you have a larger printer, the pieces could be combined (the best option is to have just two pieces to print and seal together as this will minimize leaks from the seal.) Head Electroencephalography Imaging Phantom Kohli, Siddharth Krachunov, Sammy Dataset doi:10.17632/m27cdy3z4c.2 oai:data.mendeley.com/m27cdy3z4c.2 Creative Commons Attribution 4.0 International http://creativecommons.org/licenses/by/4.0 https://data.mendeley.com/datasets/m27cdy3z4c 2021-02-25T23:59:45Z