Antenna Parameters Dataset
Description
After successfully simulating our custom-designed antenna, we gathered the optimized results. We then performed parameter sweeps for substrate width, substrate length, substrate height, patch width, patch length, feedline width, slot1 width, slot1 length, slot2 width, and slot2 length. Each parameter was swept individually while keeping the others fixed. We varied the values of substrate width and length from 5.5 mm to 7.5 mm, patch width from 4.4 mm to 6.4 mm, patch length from 1.5 mm to 5.1 mm, feedline width from 0.5 mm to 0.9 mm, slot1 width from 0.3 mm to 0.4 mm, slot1 length from 0.8 mm to 0.9 mm, slot2 width from 0.25 mm to 0.35 mm, and slot2 length from 0.5 mm to 0.6 mm. Each parameter was varied in 10 discrete steps. Following each sweep, we extracted the gain, directivity, S11 parameter, radiated efficiency, and total efficiency data from the simulation software, saving these as Txt files on the local computer. Subsequently, we converted all these Txt files into Excel (xlsx) format. We manually removed unnecessary data rows, keeping only the desired frequency data. Once all the data was gathered, we consolidated it into a single file, resulting in 1648 data points.