Laboratory assessment of an expansive soil treated with alkali-activated clay brick waste and recycled concrete aggregate - experimental dataset

Published: 20 October 2026| Version 1 | DOI: 10.17632/47dhpj2xt5.1
Contributors:
,

Description

This dataset supports the manuscript "Laboratory assessment of an expansive soil treated with alkali-activated clay brick waste and recycled concrete aggregate". It contains the primary laboratory records and the processed tables used to build the figures and tables of the paper for a highly expansive CH soil stabilized with 15% clay brick waste (CBW) activated by sodium silicate/sodium hydroxide, with 10% recycled concrete aggregate (RCA) of four parent-concrete classes or natural sand. Contents: (1) 13 original oedometer exports (.ini, DS7.2.0 acquisition software) of the loaded-swell tests, one specimen per applied stress, together with the processed record table (applied stress, load and its basis, lever ratio, ring geometry, first/last gauge readings, strain, duration, and the change in the final 6 h and 24 h); (2) the four free-swell workbooks containing the deformation histories (final recorded strains 27.10%, 1.15%, 0.58% and 1.08% at 141.8, 193.6, 217.1 and 196.1 h); (3) the four consolidation workbooks and the recalculated void-ratio series and parameters (Cc, Cs and vertical strain over 800-1600 kPa); (4) specimen-level UCS records (dimensions, wet mass, testing moisture, dry density, peak strength); (5) the processing scripts and a README documenting the root-time conversion, acquisition-block handling and load conventions. Notes on limitations: single specimen per mixture for the physical tests (no replication); loaded-swell values are net strains over the reconstructed monitoring intervals, not equilibrium values, and no zero-swell pressure is derived from them; inundation timing is not recorded in the exports; the NS consolidation worksheet is incomplete and its values are excluded; the stage-two mix-design workbook contains broken formula references, so the reconstructed proportions are illustrative and not a weighed batch record.

Files

Steps to reproduce

1. Download and unzip Data_deposit_Abdalrahman_Ibrahim_v1.0.zip and read 00_README.txt first: it defines every column and the limitations of each source record. 2. Loaded swell (01_loaded_swell). The .ini files are unmodified exports of the DS7.2.0 acquisition software. The first column is the SQUARE ROOT of time in minutes, not time - square it to recover elapsed minutes. A file may contain several acquisition blocks; concatenate them in file order (the end of one block and the start of the next agree within 0.004 mm). Stress and strain follow sigma = 98.1 * m * R / A (m in kg, R the lever ratio, A the ring area in cm2) and epsilon(%) = 100 * (d_start - d_end) / H0 (H0 the initial specimen height in mm). loaded_swell_records.csv lists, for all 13 records, the source file, the stress and whether the mass was recorded or nominal, lever ratio, ring geometry, first and last readings, net strain, monitoring duration and the change over the final 6 h and 24 h. These are net strains over the reconstructed monitoring intervals, not equilibrium values, and no zero-swell pressure is derived from them. 3. Free swell (02_free_swell). Each workbook holds one deformation history with time in minutes and displacement in mm; the reported free swell is the final recorded strain: 27.10% (untreated), 1.15% (S-M12-C0), 0.58% (S-M12-C50) and 1.08% (S-M12-NS) at 141.8, 193.6, 217.1 and 196.1 h. 4. Consolidation (03_consolidation). In the C0 and C50 source worksheets the displacement is divided by 100 instead of 10; the recalculated series are given in void_ratio_series_corrected.csv and consolidation_parameters_corrected.csv (Cc, Cs and vertical strain over 800-1600 kPa, with Gs = 2.789). The NS worksheet lacks the final readings and dry mass, so its values are excluded. 5. Strength (04_UCS_specimens). UCS_specimen_records.csv gives specimen dimensions, wet mass, testing moisture content, dry density and peak stress. 6. Scripts (05_scripts) reproduce the loaded-swell reduction (root-time conversion, block joins, strain calculation) from the raw exports. Software: any spreadsheet program; the scripts run under Python 3 with numpy and matplotlib. Contact: sibrahim@ciu.edu.tr

Institutions

Categories

Geotechnical Engineering, Civil Engineering, Construction Material

Licence