In-situ investigation of the tool-particle interaction during orthogonal cutting of SiCp/Al composite
Published: 4 September 2025| Version 2 | DOI: 10.17632/584p88sb45.2
Contributors:
Xiao-Chen Liu, Dong Zhang, Wen-Hao Liu, Xiao-Ming ZhangDescription
M1. mp4: SiC particle kinematics during cutting process M2. mp4: Statistical analysis of SiC particle behaviours Workpiece material: 15 vol% SiCp/Al composites (the matrix, 2024 aluminium, was reinforced with 60 μm average-sized SiC particles). Dry cutting test: an uncut chip thickness of 0.05 mm, a cutting speed of 5 mm/min, a width of cut of 2 mm, and a PCD cutting insert with a 15° rake angle, 7° clearance angle and an edge radius of 9~10 μm.
Files
Institutions
- Huazhong University of Science and Technology
Categories
Cutting Process, Aluminum Composite