Tool-particle interactions during cutting of SiCp/Al composites
Published: 15 January 2025| Version 1 | DOI: 10.17632/584p88sb45.1
Contributors:
Xiao-Ming Zhang, Xiao-Chen Liu, Wen-Hao Liu, Dong Zhang, Domenico Umbrello, Jose OuteiroDescription
M1. mp4: SiC particle kinematics during cutting process M2. mp4: Statistical analysis of SiC particle behaviours Workpiece material: 15 vol% SiCp/Al composites (the matrix, 2024 aluminium, was reinforced with 60 μm average-sized SiC particles). Dry cutting test: an uncut chip thickness of 0.05 mm, a cutting speed of 5 mm/min, a width of cut of 2 mm, and a PCD cutting insert with a 15° rake angle, 7° clearance angle and an edge radius of 9~10 μm.
Files
Institutions
Huazhong University of Science and Technology
Categories
Cutting Process, Aluminum Composite