Dual Feed Progressive Cavity Pump Extrusion System for Functionally Graded Direct Ink Write 3D Printing

Name: Dual Feed Progressive Cavity Pump Extrusion System for Functionally Graded Direct Ink Write 3D Printing
Creator: Max Sevcik
Published: 2024-01-25T06:37:40.558Z
Keywords: Three Dimensional Printing

Sevcik, Max; Golson, Jacob; Bjerke, Gabriel; Snyder, Isaac; Taylor, Gage; Wilson, Finnegan; Rabinowitz, Grace; Kline, Dylan; Grapes, Michael; Sullivan, Kyle; Belof, Jonathan; Eliasson, Veronica

doi:10.17632/8953pcgdys.2

Dual Feed Progressive Cavity Pump Extrusion System for Functionally Graded Direct Ink Write 3D Printing

Published: 25 January 2024| Version 2 | DOI: 10.17632/8953pcgdys.2

Contributors:

Max Sevcik,

,

Description

These files include the STL files used to create custom parts to mount the ViscoTec ecoDUOMIX-450 to the X-Gantry of the Prusa, and mount adapters to allow stepper motors to be compatible with the extruder. Also attached are Arduino files used to interpret G-code commands to run the stepper motors at different ratios. The following files are Licensed under the TAPR Open Hardware License. Users have permission to access, modify, and distribute the following files.

Files

Steps to reproduce

Please refer to the HardwareX article to reproduce and operate the following hardware: "Dual Feed Progressive Cavity Pump Extrusion System for Functionally Graded Direct Ink Write 3D Printing"

Institutions

Colorado School of Mines, Lawrence Livermore National Laboratory

Funding

Lawrence Livermore National Laboratory

DE- AC52-07NA27344

Dual Feed Progressive Cavity Pump Extrusion System for Functionally Graded Direct Ink Write 3D Printing

Description

Files

Steps to reproduce

Institutions

Categories

Funding

Licence