Ballistocardiography with breathing disorderes

Published: 25 Mar 2020 | Version 2 | DOI: 10.17632/9fmfn6kfn7.2
Contributor(s):

Description of this data

Tha dataset contains ballistocardiography signals together with ECG. We studied changes in the signals related with breath holding.

The BCG sensor dataset is obtained from twenty tested individuals. The schedule of measuring was in two types (V1 and V2) described in description. Every breath-holding was done for the time of the approximatelly 30 seconds. For measurement a force plate in the form of bed was used. The force plate had four tensometers embedded in its four legs. Each tensometer could measure the force in three orthogonal directions with a precision of up to 0.1 N. Therefore, 12 force signals were obtained. The ECG signal was measured simultaneously with the force measurement. All the signals were registered using a 24-bit AD converter with a sampling rate of 1 kHz. Measurement took place in laboratory at Faculty of Science, University of Hradec Králové, Czech republic.

Experiment data files

Related links

Latest version

  • Version 2

    2020-03-25

    Published: 2020-03-25

    DOI: 10.17632/9fmfn6kfn7.2

    Cite this dataset

    Studnicka, Filip (2020), “Ballistocardiography with breathing disorderes”, Mendeley Data, v2 http://dx.doi.org/10.17632/9fmfn6kfn7.2

Statistics

Views: 468
Downloads: 3514

Previous versions

Compare to version

Categories

Ballistocardiography

Licence

CC BY 4.0 Learn more

The files associated with this dataset are licensed under a Creative Commons Attribution 4.0 International licence.

What does this mean?
You can share, copy and modify this dataset so long as you give appropriate credit, provide a link to the CC BY license, and indicate if changes were made, but you may not do so in a way that suggests the rights holder has endorsed you or your use of the dataset. Note that further permission may be required for any content within the dataset that is identified as belonging to a third party.

Report