Data from leakage detection, applying leak-scenario falsification on EPANET

Published: 5 November 2021| Version 1 | DOI: 10.17632/cnt67hmzdb.1
Contributors:
Blessing Oghuvwu,
,

Description

Data shows the peak pressures at all the nodes of the simulated water distribution network. It also shows the new peak pressures at every node after leakages were introduced into the water distribution network.

Files

Steps to reproduce

i. Simulate a water distribution network on the Environmental Protection Agency Network software ii. Carry out extended period simulation for 70 hours for each node and record the peak pressure values iii. Introduce leakages into the water distribution network by applying leak-scenario falsification. Use 1-way valves to achieve this. Situate the leakages away from each other. iv. perform extended period simulation and record the new peak nodal pressure values.

Institutions

Afe Babalola University

Categories

Water Pressure

Licence