Chill and pattern dimension, and design process

Published: 7 April 2021| Version 1 | DOI: 10.17632/d7b6vj69np.1
Natalino Fonseca D. S. Guterres


The chill size and shape, according to the casted specimen as shown in Figure 1. The chill plate to be inserted into each specimen is one sheet, and the total number prepared for the 4 Y-Block specimens to be produced is 4 sheets. The number of plate chills according to the variation of the preheating temperature, is shown in Table 2. Figure 1. Pattern and chill plate; (a) The type and dimension of pattern; (b) 3D view of the pattern and Position chill plate on the pattern; (c) chill plate.


Steps to reproduce

The chill manufacturing process is SS 304 plate cut into rectangles with a length and width of 270mm and 25mm and bent according to the specimen shape. The material used to design the chill is austenitic stainless steel SS 304 plate with chemical composition, as shown in Table 1.


Universitas Diponegoro Departemen Teknik Mesin


Casting Material, Austenitic Stainless Steel, Design Pattern