Cumulative inaccuracies in implementation of additive manufacturing through medical imaging, 3D thresholding, and 3D modeling: A case study for an end-use implant

Published: 25 April 2020| Version 2 | DOI: 10.17632/d9j2chwdz8.2
Contributors:
Jan Sher Akmal,
Mika Salmi,
Björn Hemming,
Linus Teir,
Anni Suomalainen,
Mika Kortesniemi,
Jouni Partanen,
Antti Lassila

Description

This data belongs to the original scientific article that is “Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant” by Jan Sher Akmal, Mika Salmi, Björn Hemming, Linus Teir, Anni Suomalainen, Mika Kortesniemi, Jouni Partanen, and Antti Lassila published with MDPI in Applied Sciences (Switzerland) Special Issue — 3D Printing of Bioactive Medical Device . It contains medical CT-images of a sus domesticus acquired using a Siemens Somatom Definition Edge CT system. Please cite the original scientific article if you use this data as follows: Akmal, J.S.; Salmi, M.; Hemming, B.; Teir, L.; Suomalainen, A.; Kortesniemi, M.; Partanen, J.; Lassila, A. Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant. Appl. Sci. 2020, 10, 2968. https://doi.org/10.3390/app10082968

Files

Steps to reproduce

Please refer to the original scientific article for steps to reproduce the data.