Data on bond strength of resin cement systems to CAD/CAM resin composite after aging

Published: 30 September 2021| Version 3 | DOI: 10.17632/jd8y573s4r.3
Contributors:
,
Toshinori Okawa,

Description

The manufacturer’s recommended primer was applied to the CAD/CAM resin composite. They were bonded using three different types resin cements. Half of all the specimens were tested immediately following 24 hours of immersion in water at 37°C (thermaocycling 0 cycle ; TC 0), and half were subjected to thermocycling 10,000 cycles following 24 hours of immersion in water at 37°C (TC 10,000). The tensile test was used to determine the bond strength in MPa. The fracture surface and mode between resin cement and CAD/CAM resin composite were determined by naked eye and scanning electron microscope observation.

Files

Categories

Health Sciences

License