Conventional true value
Published: 21 November 2023| Version 2 | DOI: 10.17632/m2zyv8vvrk.2
Contributor:
Francisco Taigo Araújo BarbosaDescription
Data regarding measurements for the calculation of the conventional true value of printed specimens using fused deposition modeling, for the proposal of a new optimization method using manufacturing processes and measurement system
Files
Steps to reproduce
To determine the conventional true value (VVC), a Mitutoyo digital micrometer, model 293-821-30, with a measurement capacity of 0 to 25 mm and a resolution of 0.001 mm, was used. and by a single operator, with measurement at three points, height, T1, T2, T3, and thickness W1, W2, W2 following the procedure of (Alafaghani et al., 2017). Espessura (T) e largura (W), foram obtidas por meio de 3 medições, W1, W2, W3 e T1, T2., T3
Institutions
Universidade Federal da Paraiba
Categories
Conventional Imaging, Analytical Modeling, Spatial 3D Modeling