Microstructure of Ti-3Mo alloy after solid solution treatments

Published: 1 February 2023| Version 1 | DOI: 10.17632/mcf4wyjdz5.1
Kholqillah Ardhian Ilman


This dataset depicts the microstructure of Ti-3Mo at% after solid solution treatment. The Ti-3Mo specimens were produced by using an arc melting furnace followed by homogenization in a vacuum capsule at 1200 °C for an hour. After that, the specimens were hot-rolled to 1.5 mm in thickness. The specimens were then treated for 10 minutes with a solid solution at 1000 °C, followed by rapid cooling (quenching).


Steps to reproduce

Microstructure images are composed of magnifications of 50, 100, 200, 500, and 1000 times. Every magnification consists of four pictures of different locations. The images were obtained using optical microscope.


Universitas Muhammadiyah Surakarta Program Studi Teknik Mesin


Titanium Alloys, Microstructure, Heat Treatment, Molybdenum