Hydrogen permeation test on MS AHSS grade 1300
Description
Devanathan-Stachurski permeation tests were carried out on a grade 1300 Martensitic Advanced High Strength Steel (MS-AHSS) to obtain the effective diffusivity coefficient. Financed by the European Union - NextGenerationEU (National Sustainable Mobility Center CN00000023, Italian Ministry of University and Research Decree n. 1033 - 17/06/2022, Spoke 11 - Innovative Materials & Lightweighting). The opinions expressed are those of the authors only and should not be considered as representative of the European Union or the European Commission’s official position. Neither the European Union nor the European Commission can be held responsible for them. Keywords: Spoke11 - CNMS MOST, Ferrous alloys
Files
Steps to reproduce
Square specimens (50x50x1.2 mm) were cleaned and coated with a thin Pd layer on the anodic face. The cell was filled with NaOH 0.1 M solution. The cathodic current was varied from 0.5 to 10 mA/cm² through a series of increasing and decreasing ramps. The tests were performed with the cells submerged in a thermostatic bath. The measured temperature is reported in the data file.
Institutions
Categories
Funding
NextGenerationEU
CN00000023