Experimental data for assessing sensitivity degradation in Force Sensing Resistors

Published: 24 January 2019| Version 2 | DOI: 10.17632/tpjpcmnbxy.2
Leonel Paredes-Madrid


Data reports output voltages when testing FlexiForce sensors under cyclic loading conditions. This was done to assess sensitivity degradation using: a) An inverting-amplifier circuit. b) A voltage divider circuit. The FlexiForce sensors were tested with circuits a) and b) at multiple sourcing voltages (1.25V; 2.5V; 5V; 7.5V). 16 Specimens of each sensor model were tested at the aforementioned conditions. Data in the files are organized as follows: Column 1 through 3: Internal use, do not provide valuable information Column 4: Nominal force applied to the sensors. It was used to close the force loops using load cell measurements in the test bench. Column 5: Output voltage from Sensor 1 Column 6: Instantaneous force applied to the sensor at the moment of measuring.


Steps to reproduce

A tailored testbench was assembled to hold 16 Force Sensing Resistors (FSRs) in a Sandwich-like configuration. FSRs where loaded with a linear motor and a spring that provided mechanical compliance. Force loops were closed with a LCHD-5 load cell.


Sensor, Force Measurement