Data for: Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

Published: 20-05-2020| Version 1 | DOI: 10.17632/xw37dn4549.1
Contributor:
Marco Pérez

Description

Sample data: STL files with the 3D-CAD geometries of the specimens. CMB files considering the entirety of the evaluated FFF infill configurations and printing orientations. Experimental raw results of the samples tested in tensile, bending, and shear tests, for solid and sparse configurations in the different orientations. ASTM D638 - TENSILE TESTS RESULTS FOR SOLID CONFIGURATIONS ASTM D638 - TENSILE TESTS RESULTS FOR SPARSE CONFIGURATIONS ASTM D790 - FLEXURAL TESTS RESULTS FOR SOLID CONFIGURATIONS ASTM D790 - FLEXURAL TESTS RESULTS FOR SPARSE CONFIGURATIONS ASTM D5379 - SHEAR TESTS RESULTS FOR SOLID CONFIGURATIONS ASTM D5379 - SHEAR TESTS RESULTS FOR SPARSE CONFIGURATIONS SpecimenData.xlsx (File): List of representative specimens from every configuration. It includes all pre-process data required for the analysis of every sample. It includes one file for each representative specimen with test raw data. Each file is structured as follows: - 1st column data: Load (N) - 2nd column data: Crosshead displacement (mm) DIC post-process (Folder) It includes one file for each representative specimen with GOM post-process data. Each file is structured as follows: - 1st column data: Longitudinal DIC extensometer length increment (mm) - 2nd column data: Transverse DIC extensometer length increment (mm)

Files