Data for: High Temperature Creep of Sanicro 25 Austenitic Steel at Low Stresses

Published: 25 April 2018| Version 1 | DOI: 10.17632/y2rjfbdnht.1
Luboš Kloc


This file contains creep curves data for the Sanicro 25 steel at 700-800°C and stresses below 40MPa. Creep was measured using helicoid spring specimen technique, Stress and strain values are expressed as equivalent tensile values using von Mises criterion. Data are organised in blocks, where the first column is time relative to the test start in seconds and the other columns are strains expressesd as dimensionless values corresponding to the applied stress, which is listed in the top row and expressed in MPa. For other information like the material A and B please refer the corresponding article in MSE-A.



Materials Science