Prediction of Interlayer Strength in Material Extrusion Additive Manufacturing - supplementary data

Published: 29 October 2019| Version 2 | DOI: 10.17632/z3yfkxvkz5.2
Timothy Coogan,


This is the supplementary data for 'Prediction of Interlayer Strength in Material Extrusion Additive Manufacturing' by Tim Coogan and Dave Kazmer. The first tab of data provides the mechanical data for all parts, including the side of the box the part was cut from, the height of break along the narrow section of the gauge length, the extension at break, modulus, peak load, and strength for all specimens. The second tab includes the measured interlayer contact, predicted interlayer contact, in-line pressure, in-line contact pressure, and in-line temperatures measured for every layer of all conditions in this study.



University of Massachusetts Lowell


Rheology, Rapid Prototyping, Diffusion, Fused Deposition Modeling, Design for Additive Manufacture