Morphometric parameters diamond lattice structures

Published: 27 May 2022| Version 4 | DOI: 10.17632/z4mb6nsww8.4
, Massimo Giordano


This dataset contains - the raw values of strut measures used for statistical analysis to evaluate the effect of process parameters variation on the resulting specimens' geometry (sheet 1: "Strut measures - DoE2" and sheet 2: "Strut measures - DoE1") - the raw output data from ImageJ for cross section computation (sheet 3: "Cross section - DoE1") - the raw output data from VGStudio for relative density evaluation (sheet 4: "Relative density - DoE1") - the raw output data from compression tests with the correspondent calculations for the mechanical properties (Young's modulus, UCS, strain) (sheet 5: "Mechanical properties - DoE1") - a resume of all the morphometric parameters extracted from the raw data adopted for graphical representation (sheet 6: "Resume - DoE1")



Politecnico di Torino


Titanium Alloys, Computed Tomography, Compression Testing, Design for Additive Manufacture