Microelectronics Journal

This contains the data for ISFET SPICE Macromodel and the CVCC circuit schematic and netlist. It also contains data for various ML techniques and Bayesian inference for temperature and temporal drift compensation.

A Zip file containing: - Experimental raw data for all relevant results presented in the manuscript, - A video file showing all the equipment and devices used during the measurement of the lossy Gm-C integrator; And a PDF file with: - The documents regarding the manufacturing process at MOSIS, with photo and micrograph of the chip, - Details of our measured setup

These files are the schematic files of the quadrature oscillator, proposed in the paper. The files are related to the Cadence integrated circuit design environment.

This work does not have any specific data and I have attached one of the figures obtain from Matlab. If any information is needed, please aware me to send them. Regards

A Short MATLAB program written in this project to calculate transition times for one of the introduced gates

This repository contains the device simulation raw data of 65nm planar transistors (2D and 3D) : device command files simulation template and csv files, python scripts to run the Sentaurus device simulations and analyze the data Python scripts have description inside them on how to use them Commands: Tool Sentaurus Structure editor: sde - to make the device- sde -e Or copy- paste the commands in the command window after opening sde Once the device is made, Build mesh - to obtain tdr. Tdr will be used to run sdevice simulation sdevice - to run simulation svisual & - to view the device inspect & - to view current or transient plots Scripts written by me to automate Python_generate_sdevice_runsim.py or python_current.py needs to be copied in every folder where the sdevice command files need to be generated. It takes a template file as input and a csv file having different parameters as another input. It generates sdev files and runs sim Python_runboth.py - combines both python_post-process_250p_limit.py and python_combine_2csv.py. The first one extracts charge values from the plt files. The second one, combines the input csv file and this charge values column by column. Or copy- paste the commands in the command window after opening sde Once the device is made, Build mesh - to obtain tdr. Tdr will be used to run sdevice simulation Contact me at: nanditha@ee.iitb.ac.in (available temporarily) or at nanditha.ec@gmail.com Dept of EE, IIT Bombay, Mumbai, India