Sensors & Actuators: A. Physical
ISSN: 0924-4247
Datasets associated with articles published in Sensors & Actuators: A. Physical
Filter Results
11 results
- Data for: Very large bandwidth piezoelectric energy harvesting with frequency-tuning synchronized electric charge extraction- Data for comparison of inductor performance for piezoelectric energy harvesting with synchronized switching architectures - Theoretical and experimental comparison of power harvested with synchronized electric charge extraction (SECE-based) methods
- Data for: A wave-inspired ultrastretchable strain sensor with predictable cracksThis data table is the specific data of the data graph in the paper. The corresponding data of the graph has been named accordingly.
- Data for: Surface acoustic wave generation on piezoelectric passive substrates for axisymmetric SAW motorsThese are research data related to the submitted paper "Contributions to the development of an axisymmetric SAW motor with a stator made from non-piezoelectric material" (Journal Sensors and Actuators A). A description of all shared files can be found in the file Measurement_and_Simulation_documentation.odt.
- Data for: Efficiency Optimization of Rotary Ultrasonic Motors Using Extremum Seeking Control with Current FeedbackExtremum seeking control (ESC) is used to track the maximum efficiency of the rotary ultrasonic motor. Through ESC, driving frequency is controlled to minimize induced current. "ESC data" file presents the acquired data while tracking for different preloads and driving voltage amplitudes condition. The correspondence between maximum efficiency and minimum current is presented in "Optimum Efficiency Validation" file.
- Data for: Discharge and electrothermal efficiency analysis of capacitive discharge plasma synthetic jet actuatorSupplementary material_Fitting formula
- Data for: Sensing of airborne molecular contaminants based on microfiber coupler with mesoporous silica coatingFig 2b shows spectral response at different RIs of silica coating. Fig 4d illustrates transmission spectral responses of OMC before and after it was coated with mesoporous silica layer. Fig 6 shows transmission spectral responses and corresponding dip wavelength shifts at different temperature. Fig 7 shows the relation between wavelength shift and AMCs concentration at different temperature.
- Data for: Resonant Frequency Self-tunable Piezoelectric Cantilevers for Energy Harvesting and Disturbing Torque AbsorbingThe attachment is the Raw data and simulation programs for this paper.
- Data for: Resolution improvement in electromagnetically actuated Wheatstone bridge configuration micromechanical resonators Measured resonance curves of the magnetoelectrically actuated double clamped beams with Wheatstone bridge configuration improving their sensitivity and resolution. Raw measurement data for the figures presented in the manuscript.
- Data for: A fast method for Brillouin frequency shift estimationMatlab data file for 80km BOTDA system. A 300mw pump pulse with 20 ns is used. The frequency sweeps from10.88 GHz to 11.19 GHz with 1 MHz step and 512 averages per trace are used. A 5m hotspot placed at the end of the 80-km sensing fiber is produced by heating it up to 76 °C, while the rest of the sensing fiber has been maintained at ambient temperature (26°C). The FWHM of BGS is about 50Mhz.
- Data for: Flexible piezoelectric liquid volume sensorThe origin files of volume sensor results
1