Chemical Engineering Journal

Characterization and performance.

The uploaded pictures are all the experimental data in the article.

Fabrication of hollow or bowl-like materials using gas bubbles as templates is an attractive technique. However, it is challenging to develop simple and mild methods that produce nanosized and homogeneous gas bubble templates. Herein, excess air could outgas in the form of bubbles by mixing water and water-soluble solvents in the proper proportion. And polydopamine (PDA) nanobowls are fabricated using these bubble templates.

Particle size distribution (PSD) and phosphorus concentration data collected at the exit of a Poiseuille (laminar) flow reactor designed for continuous struvite seed crystallization. Reactor operated at saturation indexes of 0.8, 1, and 1.4.

This data set was used to calculate the mass transfer rates of hydrogen during the hydrogenation of styrene in a single catalyst pellet reactor. There is a dataset for each feed condition studied, with each set containing the results of the six flow rates used. The GC information and method is as follows; Column DB-624 Temp range: -20 - 260 C Length: 30 m Diameter: 0.25 m Film thickness: 1.40 um The complete method details can be found in the document attached, named stryene GC method

Source data for the characterisation of mesoporous silica particles that were used for fluid bed hot-melt amorphisation of ibuprofen in order to enhance its dissolution rate compared with its crystalline form.

Influence of mixing ratio of soda lignin/PE on the GE and CE and gas fraction of co-gasification at 700oC

Experimental data from the operation of the lab-scale anaerobic-aerobic moving bed biofilm reactor system

This file contains simulation model input files for the simulations carried out including a windows executable and the source code for the simulation software OGS v5. details: - exe/ windows executables for the software ogs5 - ogs5/ source code of ogs5 - calibration/ recalibrated process models, model calibrated on data calibration by Boog (2019) - validation/ validated process model, model validated on data cross-validation by Boog (2019) - scenario_analysis/ process model used for scenario_analysis - how_to_run_simulations.pdf/ guideline how to run simulations on win and linux OS - file_orga.csv details of model input files

1. Standard operating procedure used to collect CO2 photoreduction data. 2. SEM images of coated stainless steel supports. 3. Threshtom.py Python script used for estimating coverage using machine vision. 4. compareIt program files used for extracting GC data and subsequent nonlinear numerical analysis 5. GC_data 6. Readme for understanding data in 'Matlab_kinetic_data.mat' 7. Matlab file of data 'Matlab_kinetic_data.mat' used for fitting the probability LH based kinetic models. 8. Experimental details for the CO2 photoreduction experiments **Please note that 'ImportAgilentFID.m' was written by James Dillon - see https://github.com/chemplexity/chromatography/blob/master/Development/File\%20Conversion/ImportAgilentFID.m