A 3D printed camera bracket for the DJI Phantom 3
Description
This STL file can be used to print a camera bracket that was designed to fit on the legs of the DJI Phantom 3. The camera bracket attaches to the legs of the Phantom 3 using zip ties and is compatible with the standard three-pronged GoPro mount, making it useful for many consumer cameras. The bracket can hold a small 5V USB power bank and the design does not interfere with the Phantom 3's camera.
Files
Steps to reproduce
This bracket should be printed in PETG with support. First, make sure that your printer can use PETG filament and follow any printer-specific instructions for this filament. PETG is hygroscopic so make sure to print the bracket in a climate-controlled room (do not print in a humid environment). Some of the parts on the bracket are small so use 100% infill. Use a heated bed. After the print has finished, gently remove the support and check for warping. Attach the bracket to the legs of the Phantom 3 using zip ties. Attach your imaging device to the bracket using a M5 bolt and nut.