Protection Current Density Datum Measurements
Published: 1 February 2020| Version 2 | DOI: 10.17632/4s7nsc2hnc.2
Contributor:
Michael TraskDescription
This data describes the list of current density datum point measurements for AISI 1018 CS found at a flow velocity of 2.5 m/s and 0 wt.% sand concentration in saturated potash brine to ensure the comparability of data within different data sets at higher flowrates. Before experiments were performed at higher flow rates, measurements at a flow velocity of 2.5 m/s and 0 wt.% sand concentration are performed. If the current density to protect the steel elbow at this condition is the same prior to each experiment, the results of the experiments are comparable to each other. The data shown displays the datum points acquired prior to experiments performed at four different flowrates.
Files
Institutions
University of Saskatchewan
Categories
Density Current