Load–displacement data for real-time low-temperature Brazilian splitting tests of granite after heating and liquid nitrogen cooling cycles

Published: 25 October 2026| Version 1 | DOI: 10.17632/9pd6cfyd2z.1
Contributors:
Guoying Wang,
, Housheng Jia, Gan Feng, Shaowei Liu

Description

This dataset contains the experimental data supporting the study entitled “Effect of real-time low temperature on Brazilian splitting characteristics of granite after heating and liquid nitrogen cooling cycles.” Granite Brazilian disc specimens with a diameter of 50 mm and a thickness of 25 mm were heated to 100, 200, 300, 400, 500, and 600 °C and subjected to 1, 5, 10, or 15 high-temperature–liquid nitrogen cooling cycles. Brazilian splitting tests were then conducted under real-time low-temperature conditions at approximately −162 °C. The dataset mainly includes the load–displacement data obtained during the Brazilian splitting tests under different heating temperatures and liquid nitrogen cycle numbers. These data were used to calculate and analyze tensile strength, splitting load-point stiffness, pre-peak input work, and the corresponding mechanical responses reported in the manuscript. Two replicate specimens were used for each temperature–cycle condition. The files are organized according to heating temperature and number of liquid nitrogen cycles to facilitate identification and reuse.

Files

Steps to reproduce

Granite disc specimens with a diameter of 50 mm and a thickness of 25 mm were heated to the target temperature at 5 °C/min and held for 2 h. The specimens were then subjected to liquid nitrogen cold-shock treatment for 1 h. One complete high-temperature heating–LN₂ cooling process was defined as one cycle, and 1, 5, 10, and 15 cycles were investigated. After treatment, the specimens were maintained at approximately −162 °C under continuous liquid nitrogen immersion. Brazilian splitting tests were conducted using displacement control at a loading rate of 0.05 mm/min. Load and displacement were recorded continuously during loading. Two replicate specimens were tested for each temperature–cycle condition.

Institutions

Categories

Geotechnical Engineering, Rock Mechanics

Licence