Supporting data for "Verified CFD and analytical modelling of a flat-plate solar air collector: model agreement, experimental dispersion, and the choice of error metric"

Published: 9 October 2026| Version 1 | DOI: 10.17632/czkzz6b5sk.1
Contributors:
,
,
,

Description

This dataset supports the article "Verified CFD and analytical modelling of a flat-plate solar air collector: model agreement, experimental dispersion, and the choice of error metric" (Case Studies in Thermal Engineering, submitted). It contains the inputs, numerical verification and comparison tables for a conjugate CFD model (ANSYS Fluent 2021 R2; SST k–ω turbulence; surface-to-surface radiation with solar ray tracing) and an independently re-implemented Hottel–Whillier–Bliss analytical model of a single-glazed flat-plate solar air collector, evaluated at the eight operating conditions measured by Medina Flores et al. (2019) in Celaya, Mexico. Included are the collector geometry, material properties and operating conditions; the solar-load calibration for each case; the mesh family, grid convergence indices and iterative drift; the measured, published, re-implemented and CFD outlet temperatures; error metrics on outlet temperature and on temperature rise; the implied experimental efficiencies; the analytical model implemented in Python and EES; and the script used for the grid convergence indices. Each CSV file reproduces one table of the article, with the same numbering; the README file describes all files.

Files

Steps to reproduce

1. Analytical model: run hwb_medina2019.py (Python) or Colector_Solar_Placa_Plana_v2.EES (EES) with the operating conditions of Table04_operating_conditions_8_cases.csv and the collector data of Table02_collector_geometry_materials.csv as inputs. Air properties are evaluated at the mean fluid temperature. The results correspond to the re-implemented column of Table11. 2. CFD model: build the five-body conjugate domain of Table02 (glass cover, air channel, copper absorber, fibreglass insulation and MDF casing; tilt 15°; no symmetry plane) in ANSYS Fluent 2021 R2 with the medium mesh of Table06. Use the steady pressure-based solver, the SST k–ω turbulence model and surface-to-surface radiation with solar ray tracing at normal incidence, with the constant air properties of air_properties_CFD.csv, the solid properties of Table05 and the external surface properties of Table08. Impose the calibrated irradiation of Table07 (I_cal = 0.794 I_T) and check, before iterating, that the solar report of the solver reproduces the absorber line of Table07. Boundary conditions: mass-flow inlet with the flow rate and inlet temperature of Table04, and pressure outlet at zero gauge pressure; external walls as described in Section 4.6 of the article. 3. Numerical verification: solve the case at 14:45 on the three meshes of Table06 and apply the procedure of Celik et al. (2008), implemented in gci_celik.py, to reproduce Table09. 4. Comparison: Tables 11 to 13 follow from the results of steps 1 and 2 and the measurements of Medina Flores et al. (2019).

Institutions

Categories

Mechanical Engineering, Heat Transfer, Computational Fluid Dynamics, Solar Thermal Energy

Licence