Raw characterisation data: iron oxide co-precipitated with Parmotrema perlatum lichen extract, washed for 2, 4 and 6 cycles
Description
Unprocessed instrument data for three portions of a single alkaline co-precipitation of Fe(II) and Fe(III) chlorides carried out in the presence of an aqueous extract of the lichen Parmotrema perlatum (Huds.) M. Choisy, which were washed with deionised water for two (sample CR), four (E) and six (F) cycles with every other step held constant. The dataset supports an article reporting that additional washing reduced organic residue but did not reduce residual chloride, and that Raman spectroscopy at 5–10 mW shows hematite that diffraction does not detect. Contents: X-ray diffraction (PANalytical Empyrean, Cu Kα; .xrdml, .rd, .xlsx export and scan parameters); thermogravimetry (Shimadzu DTG-60H, N₂, 10 °C/min to 900 °C; ASCII); Raman spectra at 532 nm and nominal 5 and 10 mW (.txt, .spc, .srdb); X-ray photoelectron spectroscopy (Omicron, Al Kα; VAMAS .vms survey and Fe 2p, O 1s, C 1s, N 1s, P 2p regions); zeta potential and conductivity (Anton Paar Litesizer 500; instrument reports and data exports); infrared spectra (deposited for transparency, not used); field-emission SEM (Zeiss InLens, 10 kV, ten frames per sample at matched magnifications); and high-resolution TEM (2048 × 2048 frames with pixel calibration in TIFF tag 34682). The lichen authentication certificate, the laboratory washing record and MD5 checksums for every file are included, together with all analysis scripts, which run directly on these files and reproduce every table and figure in the article. No file has been smoothed, background-subtracted, normalised or otherwise altered. The README states the detection limits, the specimen-displacement offsets of the diffraction patterns, the quantities that were not recorded (yield per portion, wash volume, supernatant conductivity, suspension concentration, laser power at the sample) and the measurements that do not exist for these samples. This dataset is separate from the authors’ Cucurbita pepo dataset (doi:10.17632/pkxy842bmp.1); both contain samples labelled E and F that are unrelated materials.
Files
Steps to reproduce
Steps to reproduce Unzip the archive and verify integrity: cd Parmotrema_perlatum_iron_oxide_dataset && md5sum -c 09_Documentation/MD5_checksums.txt cd 10_Analysis_scripts and run in order: tga2.py, fringe.py, xrdfinal.py, simfit.py, xps2.py, xps4.py, raman2.py, sem2.py, then f1.py, f234.py, f567.py, f7b.py. Requires Python 3 with numpy, scipy, matplotlib, openpyxl and Pillow. Outputs appear in ./output/. README_scripts.md maps each script to the table or figure it produces. Zeta-potential and conductivity values are read directly from the instrument PDFs in 05_Zeta_potential.
Institutions
- Mody University of Science and TechnologyRajasthan, Laxmangarh