Physical model test monitoring data
Published: 20 October 2026| Version 1 | DOI: 10.17632/gmtgzxyzj3.1
Contributor:
Taiyi ChenDescription
Physical model test monitoring data
Files
Steps to reproduce
Physical model tests were conducted to investigate the slope instability mechanism under cyclic reservoir water level fluctuations. A geometrically similar model was constructed using lime-cemented sand /scaled fault gouge materials with a geometric similarity ratio of 1:320 . The model monitored the progressive deformation process through a set of embedded sensors: Water pressure sensors:recorded pore water pressure variations during reservoir level cycles; Displacement sensors: (linear displacement transducers) measured surface and internal displacements
Categories
Engineering Geology