Filter Results
40 results
- Data for: Effects of h-BN particles on the structure, oxidation behaviour, and kinetics of C/C composites fabricated via CVIThe isothermal oxidation data of C/C and C/C-BN composites is shown in the document at 600-900℃
- Dataset
- Data for: Effect of Niobium on Sulfide Stress Cracking Behavior of Tempered Martensitic SteelFig. I is the rising permeation transients of samples with different Nb content in form of normalized flux [J(t)/Jss] and logarithm of normalized time τ for comparison with the theoretical curve.Where τ=DLt/L2, J(t)=I(t)/AF and a value of 1.45×10-5 cm2/s was used for the scaling parameter of lattice diffusion coefficient DL. It can be seen in Fig. I that the normalized permeation transients are all steeper than predicted from Fick’s second law, indicating that trap occupancy is significant. Fig.II is the hydrogen permeation curves for as-tempered 30 Nb steel with three different specimen thicknesses. Fig.III is the normalized hydrogen permeation curves of as-tempered 30 Nb steel with three different specimen thicknesses.It indicates that the permeation currents show good agreement after normalizing, suggesting that hydrogen transport shows independence of thickness and is under bulk/volume rather than surface control. Fig.3 to Fig. 18 correspond to the raw or processed data in the manuscript.
- Dataset
- Data for: Influence of h-BN as an additive on oxidation behaviour and kinetic characteristics of carbon/carbon compositesThe file shows the original data of isothermal oxidation tests.
- Dataset
- Data for: Improvement of corrosion resistance of Zn-Ni alloy coatings by anodizing in selected alcoholic solutionsRaw results
- Dataset
- Data for: An Interesting Oxidation Phenomenon of Cr coatings on Zr-4 substrates under High Temperature Steam EnvironmentThe raw data file of XRD is in the XRD folder. The surface and cross-section morphology figures are in the SEM folder. The elemental analysis of the files for EDS is in the EDS folder.
- Dataset
- Data for: Corrosion and high-temperature steam oxidation of E110 alloy and its laser welds after ion irradiationEDS data
- Dataset
- Data for: Corrosion Inhibition Behaviour of Sodium Dodecyl Benzene Sulphonate to Brass in Al2O3 Nanofluid and Simulated Cooling WaterCorrosion of brass in SCW-Al2O3-SDBS nanofluid and SCW
- Dataset
- Data for: Separation and kinetic study of iron corrosion in acidic solution via a modified tip generation/substrate collection mode by SECMUME images, corresponding CV, alignment of tip and substrate, COMSOL model reports for polarization curve based on 2D Axisymmetric mode and Tafel curve based on 1D mode.
- Dataset
- Data underlying the publication: Small concentrations of NaCl help building stable inhibiting layers from 2,5-dimercapto-1,3,4-thiadiazole (DMTD) on AA2024-T3This dataset includes the raw data and processed data related to the paper "Small concentrations of NaCl help building stable inhibiting layers from 2,5-dimercapto-1,3,4-thiadiazole (DMTD) on AA2024-T3". doi:10.1016/j.corsci.2023.111562. This research aims to understand the interaction of an organic inhibitor: DMTD with the AA2024-T3 and the stability of inhibiting layers. This is a fundamental study on the corrosion inhibitor for AA2024-T3. The method of data collection includes in-situ electrochemical potential noise correlated with optical images, SEM, XPS, and Raman spectroscopy. The data were exported from the set-up as TXT/EXCEl/PNG/JPG/TIFF/WORD file. The plots are processed in Origin and saved as OPJU and PNG.
- Dataset
- Data underlying the publication: Small concentrations of NaCl help building stable inhibiting layers from 2,5-dimercapto-1,3,4-thiadiazole (DMTD) on AA2024-T3This dataset includes the raw data and processed data related to the paper "Small concentrations of NaCl help building stable inhibiting layers from 2,5-dimercapto-1,3,4-thiadiazole (DMTD) on AA2024-T3". doi:10.1016/j.corsci.2023.111562. This research aims to understand the interaction of an organic inhibitor: DMTD with the AA2024-T3 and the stability of inhibiting layers. This is a fundamental study on the corrosion inhibitor for AA2024-T3. The method of data collection includes in-situ electrochemical potential noise correlated with optical images, SEM, XPS, and Raman spectroscopy. The data were exported from the set-up as TXT/EXCEl/PNG/JPG/TIFF/WORD file. The plots are processed in Origin and saved as OPJU and PNG.
- Dataset
1