International Journal of Plasticity

Data of uniaxial tensile tests for DP steels

Data of uniaxial tensile tests for aluminum alloys

Raw data of DP780 biaxial tensile tests

Raw data for DP590 biaxial tensile tests

The source code of Yld2000-Var VUMAT

The source code of the utilized Crystal Plasticity VUMAT

Raw data of DP980 biaxial tensile tests

Tests were conducted at Univ. Bourgogne Franche-Comte, FEMTO-ST Institute, Department of Applied Mechanics, Besancon, France. The tests were conducted under isothermal conditions at room temperature when the frequency of 5 Hz and stress ratio of 0.5 were applied (for a PC -polymer). The elongation of dumbbell -shaped PC-specimens versus the applied force F was measured. The elongation was measured by an extensometer. The stress was defined by F/A, where the area of the initial cross section (gauge section) is given by A. Hysteresis loops given in the paper are based on this stress vs strain -data.

Experimental 2D diffraction patterns (Debye-Scherrer rings) for in situ loading of AZ31B magnesium alloy samples, as described in the paper: file names correspond to load points A,B,C ... described in the paper.

Visualization of dislocation motion. First animation shows strong self-pinning, extremely bent dislocation line, unpinning by generating defect clusters and Frank loops, partial dissociation (T = 2000 K, shear stress = 1000 MPa). Second animation shows kink-driven motion with some dissociation (T = 1250 K, shear stress = 100 MPa).