Enhanced Durability of Cr-Primed MoS₂ Coatings on Aluminum for Aerospace Flap Rail Slider Pads

Published: 9 January 2026| Version 1 | DOI: 10.17632/pchzt6t2mz.1
Contributor:
Sujan Ghosh

Description

These are the tribological test data for Enhanced Durability of Cr-Primed MoS₂ Coatings on Aluminum for Aerospace Flap Rail Slider Pads. The tests were performed in an RTEC Tribometer. The coated aluminum samples served as the flat lower specimens. A 2 N normal load, which is equivalent to 534 MPa maximum contact pressure, was applied in dry air at room temperature, and the ball reciprocated over a 5 mm stroke at a constant scan speed of 10 mm/s with an initial acceleration of 10 mm/s². A chrome steel ball (diameter: 6.3 mm)

Files

Institutions

  • University of Arkansas at Little Rock

Categories

Nanoindentation, Surface Topography, Tribological Analysis

Licence