Progress in Organic Coatings

TG data for the coating composites under different heating rates.

TG data of silicone rubber material

TG data of the ablation resistant reinforcement.

These are the raw data used to create Figure 4.

Data for this manuscript.

1. The FT-IR of the mullite, AM and M-S particles. 2. The XRD of the mullite, AM and M-S particles. 3. The polarization curves of the Al-Si alloy, OSC and MHC. 4. The EIS of the Al-Si alloy, OSC and MHC. 5. The EIS of the MHC with different immersion time.

Refractive index of varnish (Mr. colour 46) as a function of time

Fig. 1 Synthesis of rice-husk-ash-modified polyacrylate Fig. 2 Macroscopic images of RHA silica (unmodified) and modified silica Note: (a) RHA silica; (b) Modified silica Fig. 3 Scanning electron microscopy of RHA before and after grinding Note: (a) Initial RHA before grinding; (b) RHA after grinding Fig. 4 Scanning electron microscopy of modified silica before and after grinding Note: (a) Modified silica; (b) Modified silica after grinding Fig. 5 FTIR spectra of RHA silica and modified silica Fig. 6 Dynamic light scattering curves of different emulsion samples Fig. 7 Stress–strain curves of coatings with different monomers and modified Si loading Fig. 8 Morphology of silica before and after dispersion in the emulsion and its film Note: (a) and (b) silica before dispersion, (c) silica dispersed in the emulsion, (d) wood coating surface with silica dispersing Fig. 9 AFM-topography (3D) of coating on wood with and without silica modification (a) Neat polyacrylate coating on wood; (b) Polyacrylate coating with silica modification on wood

Supporting Information for Influence of the First Normal Stress Differences on Model Hydrophobically Modified Ethoxylated Urethane-Thickened Waterborne Paints Brush Drag

contains Particle size distribution ; Gel rate; contact angle; IR spectrum ; TG analysis