Building and Environment
ISSN: 0360-1323
Datasets associated with articles published in Building and Environment
Filter Results
16 results
- Data for: Influence of commercial glazing and wall colours on the resulting non-visual daylight conditions of an officeExperimental data of the conducted experiments presented in the Influence of commercial glazing and wall colours on the resulting non-visual daylight conditions of an office paper.
- Data for: Changing the microstructure of activated carbon to improve the adsorption performance of chemical filters in microelectronic cleanroomsThis is the results of molecular simulation and BET test.
- Data for: Detection of zone sensor and actuator faults through inverse greybox modellingThe dataset includes verified fault data from manual commissioning of 35 zones and archived BAS data. The read me file in the zipped file describes the data fields and the associated paper presents details regarding data collection and other contextual details.
- Data for: Understanding Occupant Behaviors in Dynamic Environments using OBiDE FrameworkTwo data files are provided. The first one carry the spatio-temporal data of occupants. The second file contains the description of the building information from where the dataset is collected. This dataset is already in-review by Data in Brief journal.
- Data for: Sea breeze cooling power and its influencing factors in a coastal cityThe data presented here include air temperature data in the Adelaide CBD, weather data at the Adelaide Airport station, sea surface temperature near the coast of Adelaide. The half-hourly air temperature data at 17 points inside the Adelaide CBD have been collected by the Adelaide urban heat island monitoring network. This network data were used in the analysis of urban climate and the sea breeze cooling effect in the Adelaide CBD. The weather at the Adelaide Airport station were used to identify sea breeze days.
- Data for: Electrostatically assisted air coarse filtration for energy efficient ambient particles removal: long-term performance in real environment and influencing factorsThis material is attached (including Figs. A1 ~ A6 and Tables A1 ~ A9).
- Data for: Personal thermal comfort models with wearable sensorsWe collected physiological signals (e.g., skin temperature, heart rate) of 14 subjects (6 female and 8 male adults) and environmental parameters (e.g., air temperature, relative humidity) for 2-4 weeks (at least 20 hours per day). The dataset consists of environmental data and physiological signals of the subjects.
- Data for: Office concepts: A scoping reviewThese two documents are the supplementary materials for the study "Office concepts: A scoping review". The first document consists of the methodological details describing the charting done in the review. The second document consists of the raw data from the included studies in the review.
- Supplementary Materials for: Thermal performance prediction of outdoor swimming poolsSupplementary Materials 1 cover the derivation of our forced convection heat and mass transfer model for the swimming pool. Supplementary Materials 2 cover the calculation methodology for the shading factor of the surrounding podium around the pool.
- Data for: Life Cycle Assessment of Natural vs Conventional Building Materials: A Case Study on Cob Earthen ConstructionResearch Data File: Cradle to Site Life Cycle Assessment (LCA) of Natural vs Conventional Building Materials, A Case Study on Cob Earthen Material