Journal of Alloys and Compounds

Experimental data of the article of "Reduce the low-frequency dielectric loss of (In0.5Nb0.5)0.95Ti0.05O2 ceramics by constructing insulating ZrO2 phase boundaries".

friction and wear，XRD data

Phase composition in K447A superalloy obtained via EPMA and the friction of solid in the grain boundary of K447A superalloy obtained via JMatPro software are listed.

I-V for the solar cell with the best performance

Dataset in excel 2003 format. This dataset contains the data in all figures, including Figure 1, , Figure 3, Figure 4, Figure 5, Figure 6, Figure 7, Figure 8, Figure 9, Figure 10, Figure 11, Figure 12, Figure 13. Readers may just import the any dataset into a plot software, such as origin 8, to plot a figure, which should be the same as that shown in the paper.

Fe 2p3/2 and O 1s XPS spectra of BFO-o and BFO-u catalysts.

The assembled data includes the related XRD phase analysis，SEM micro-structures， electrical and mechanical properties measures. In addition， the critical current density/long cycling stability test of the Li/LLZTO/Li symmetrical battery and the full cell performances of Li//LLZTO//NCM/LFP are all referred in the abovementioned data. However， there is some problem for the dataset system. If the file is over 1MB，the uploading process would be unsuccessful so that the data is not complete.

The processed data represents the punch displacement curves and diffraction patterns observed in the sintered composites. The curves relate to the densification of the composites while the various phases present in the sintered composite are presented in the XRD results.

The developed EAM potentials of Fe-Cu-Al, i.e. the tabulated and LAMMPS setfl format files.

The original data includes Fig. 1, Fig. 2, and Fig.3.