Additive Manufacturing
ISSN: 2214-8604
Datasets associated with articles published in Additive Manufacturing
Filter Results
18 results
- Data for: Synergistic Effects in Hydrodynamic Cavitation Abrasive Finishing for Internal Surface-Finish Enhancement of Additive-Manufactured ComponentsCorner surface finish quality; surface morphology; surface characterisation; surface finishing
- Data for: Synergistic Effects in Hydrodynamic Cavitation Abrasive Finishing for Internal Surface-Finish Enhancement of Additive-Manufactured ComponentsPerformance characteristics map; hydrodynamic flow characteristics; areal surface topography; SEM image mapping procedures; additional data for synergy map
- Data for: Modification of surface characteristics and electrochemical corrosion behavior of selective laser melted stainless steel 316L after laser polishingCSV files containing the data plotted in figures that are presented in the paper of stainless steel 316L before and after laser remelting: i.e., laser polishing. The data includes: surface topography, surface roughness metrics, x-ray diffraction, micro-hardness, residual stress, electrochemical analysis for corrosion behavior.
- Data for: Effect of ionising radiation on the mechanical and structural properties of 3D printed plastics.Analysis of 3d printed plastics: PLA, ABS, Nylon, TPU, PC, CPE, CPE+. Irradiated in the 0.5-5.2 MeV region. Data from samples irradated at various dose levels Stress-strain plots FTIR spectroscopy Raman spectroscopy Chemical structures
- Data for: Influence of Solidification Cell Structure on the Martensitic Transformation in Additively Manufactured SteelsXRD data and Feritscope data for 17-4PH and M300 additively manufactured samples.
- Data for: Highly Loaded Fiber Filled Polymers for MatEx: A Review of Current UnderstandingMechanical data collected from a number of sources across literature that represent the current explored and potential space for composite materials used in material extrusion based additive manufacturing.
- Data for: Parametric Analysis to Quantify Process Input Influence on the Printed Densities of Binder Jetted Alumina CeramicsMeasured densities of binder jetted alumina prisms with various process parameter combinations. Parameters were defined by an orthogonal design of experiments detailed in the manuscript.
- Data for: Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applicationsThis data is from the research article entitled “Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applications” [in press]. This article presents data from a series of tests which were taken on rectangular 3D printed specimens in order to determine the electrical resistivity of the material. Variations to the specimens include different initial build orientations and different heat treatments to determine their effects on resistivity. Resistance measurements were taken along with the physical dimensions of each specimen.
- Data for: Development of a Hot-Melt Extrusion (HME) process to produce drug loaded Affinisol™ 15LV filaments for Fused Filament Fabrication (FFF) 3D printing.Supporting data sets on thermal analysis, mechanical testing and dissolution data
- Data for: Room Temperature Extrusion 3D Printing of Polyether Ether Ketone Using a Stimuli-Responsive BinderSupporting experimental data and procedures.
1